How to Dismantle a Bathroom Sink Faucet: A Step-by-Step Guide

Over time, a basin faucet may encounter some issues that necessitate disassembly and replacement. To avoid damaging the water pipes, it is essential to follow the correct steps during disassembly. Here’s a guide on how to disassemble a basin faucet.

How to Disassemble a Basin Faucet

1. To disassemble the basin faucet, first locate the water inlet valve, which is typically installed on the wall beneath the basin. Before removing the faucet, you should first turn off the angle valve to cut off the water supply to the basin faucet. This prevents a large amount of water from flowing out during disassembly, helping to conserve water resources.

2. Even after closing the angle valve, there may still be residual water in the basin's pipes. Therefore, you should turn on the basin faucet to let any remaining water drain out until no more water flows from the faucet.

3. When installing the basin faucet, it is usually necessary to use a water supply hose to connect the inlet of the basin faucet to the angle valve. When disassembling the faucet, hold the water pipe with one hand and use a wrench to carefully unscrew the connection between the water supply hose and the basin faucet with the other hand.

4. In the installation of the basin faucet, it is typically secured with a fastening nut to tighten the water supply hose. During disassembly, locate the fastening component of the basin faucet and use pliers or a wrench to remove it. After that, you can take out the basin faucet.

5. If the water supply hose has become brittle over time or the fastening component has rusted, it may be challenging to remove the water supply hose easily. In such cases, it is advisable to apply some oil to the rusted area before attempting to remove the basin faucet.

This is a detailed guide on how to disassemble a basin faucet, and I hope it helps you tackle the disassembly process. When disassembling and installing the basin faucet, it's vital to apply the right technique and avoid using excessive force, as this could damage the faucet.