Home / Blog Center / Chargers / Is It Acceptable to Leave the Toilet Area Unglued?

Is It Acceptable to Leave the Toilet Area Unglued?

08/02/2025 | Hawkrown

Toilet installation is a necessity in everyday life and can be done during the later stages of home renovation. So, is it okay not to caulk around the toilet? What should you pay attention to during installation? Let’s take a look!

Is it okay not to caulk around the toilet?

No, it is necessary to caulk. Caulking around the toilet is essential to fix its position securely and ensure there are no water or air leaks. Typically, you should first determine the position and outline it with a pen. Then, place the toilet on the ground, aligning it with the drain pipe, and apply caulk along the edge. Finally, wipe away any excess caulk, let it sit for 2-3 days, and then trim any remaining caulk with a blade.

What should you pay attention to during toilet installation?

1、Before installation, check the drainage pipes for any debris, such as mud or toilet paper, and ensure the installation floor is level. If there is a significant discrepancy, adjustments need to be made. Additionally, try to keep the water inlet pipe short so that the drain outlet is 2-5 millimeters above the ground.

2、It is essential to hire professionals for installation. Do not attempt to cut corners by using cement for adhesion. Cement expands and contracts with temperature changes, which can eventually cause the toilet base to crack and become unrepairable. Typically, glass silicone is used for sealing around the toilet, and you should wait 24 hours after it has cured before using the toilet.

3、After installation, check for any leaks. Usually, you should let water flow for 3-5 minutes to flush the pipes, then connect the angle valve and soft hose to the tank accessories, and check the water inlet valve to ensure there are no blockages.

4、Finally, test the toilet’s drainage function by installing the tank accessories and filling it with water. Press the flush button to see how powerful the flush is. If the water flows swiftly and creates a whirlpool, that indicates strong flushing power and is less likely to clog in the future. Otherwise, you may need to recheck the tank installation.

In summary:the above information explains whether it is okay not to caulk around the toilet and what to consider during installation. I hope this helps those in need. If you want to learn more about related topics in the future, feel free to follow the Hawkrown website for more information.

Contact Us

Submission Successful

ok