How to Diagnose and Fix Low Water Flow in Your Toilet

Now that most households have installed toilets, over time, some may experience weak flushing and find it difficult to clean properly. Let’s explore how to resolve this issue.

What to Do if the Toilet Has Weak Flushing：

For a side-press toilet, the chain connected to the side handle may be too long, leading to weak flushing. To fix this, open the tank lid, loosen the nut on the lever, and adjust the lever length to the appropriate size. If the water level in the fill valve is too low, it can also cause this issue. Remove the fill valve, take out the clip, rotate the valve counterclockwise to adjust its height, then reattach the clip after rotating it clockwise. This should resolve the problem.

Maintenance of the Toilet：

1、Regular cleaning of the toilet is important. It’s advisable to wipe it down daily and conduct a thorough cleaning weekly to prevent stains from accumulating, which can make cleaning more difficult later.

2、If your water source is hard water with many impurities, pay extra attention to the drain holes to keep them clean and prevent clogs.

3、Long-term use can cause the toilet seat’s fastening washers to become loose. Regularly check and tighten the seat’s nuts. Additionally, handle the toilet seat gently and avoid slamming it shut, as this can lead to premature wear and tear.

4、After pouring a cleaner into the toilet, do not immediately flush; let it sit for a while before scrubbing. Avoid using boiling or hot water to clean the toilet.

Cleaning the Toilet：

1、Using a toothbrush and soapy water is effective for cleaning. Avoid using abrasive materials like steel brushes or corrosive solutions, which can cause damage.

2、Use a cloth dampened with warm water to wipe down the outer ceramic surface of the toilet, then dry it with a clean towel. Pay special attention to the crevices where dirt tends to accumulate.

3、The toilet seat is also prone to bacteria, so it should be cleaned promptly after each use. Use a sponge with a bit of cleaner to wipe it down, then rinse with clean water and dry with a towel to reduce bacterial growth.

summary：This information covers the usage and maintenance of toilets. For more renovation insights, please continue to follow our website.