How to Efficiently Disassemble an Integrated Bathroom Heater Lamp

For bathrooms, the humidity is quite high, especially in winter, which increases the feeling of cold. To address this issue, many people install a heating lamp (bathroom heater) on the ceiling, which can increase warmth and provide comfort. However, after prolonged use, the heating lamp may get damaged, which leads to the need for disassembly. So, how do you disassemble an integrated heating lamp? Let’s take a look together, and this will hopefully provide you with fresh insights.

How to Disassemble an Integrated Heating Lamp

First, insert a screwdriver into the gap at the edge of the panel to pry it open and remove the cover. Once removed, you will see the internal lamp structure. Typically, the heating lamp has a red mark, while the lighting lamp has a green mark. To disassemble, simply press down into the slot, and you will easily remove the lamp. If you need to replace it, simply install a new heating lamp or lighting lamp.

Which Type of Heating Lamp is Better

1. Lamp Heating Lamp

a.Advantages

This type is the earliest one, primarily using the heat emitted through radiation to quickly warm up a space. It has a high power range, usually between 1100 to 2000W, meaning it emits heat immediately upon being turned on without the need for preheating. Additionally, its price is relatively low, resulting in a higher cost-performance ratio.

b.Disadvantages

However, it also has several drawbacks. For example, the lifespan is shorter, and the bulbs heat up excessively, which can lead to damage. There is also a higher risk of safety hazards during use. If a filament burns out, it’s manageable, but if it explodes, it could pose serious safety risks. Furthermore, the light is quite harsh, which can severely harm children’s eyes.

2. Fan Heating Lamp

This type primarily uses PTC ceramic heating to circulate and warm up the cold air, addressing the various shortcomings of lamp heating. From a usage perspective, it is much safer and does not strain the eyes as much. The warmth is distributed more evenly; however, it requires a certain amount of preheating time and tends to be priced higher.

In summary：this concludes our introduction to how to disassemble an integrated heating lamp and which type is preferable. We hope this information has been helpful. If you would like to learn more about renovation knowledge, you can follow our website.