How to Replace a Broken LED Light in Your Ceiling-Mounted Bathroom Heater

Many families choose to install integrated ceiling bath heating lamps in their bathrooms, which typically have LED lights installed inside. When the LED lights are damaged, they need to be replaced promptly. Below, let's learn how to replace the LED lights in an integrated ceiling bath heating lamp.

How to replace the LED light in an integrated ceiling bath heating lamp when it’s broken

First, turn off the power supply at home. Use a small metal piece or similar tool to insert into the gap of the integrated ceiling and pry it open to remove one of the ceiling panels. Next, take down the two side heating lamps and also remove the two hanging springs on the side. Then, remove the entire plastic cover of the bath heater. Finally, unscrew the old LED light and install the new one.

Precautions for installing an integrated ceiling bath heating lamp

1. When installing the integrated ceiling bath heating lamp, a switch with a waterproof cover should be installed, and the switch should have a capacity of over 10A. Since the bathroom is often wet due to washing, this space can be very humid, so to avoid safety hazards, it’s essential to prevent the switch from getting wet.

2. Usually, a layer of PVC ceiling needs to be added when installing an integrated ceiling bath heating lamp, and half of the bath heater must be installed within the ceiling. If the bath heater is too thick, it will make the integrated ceiling bath heating lamp look unappealing, so it’s important to select a bath heating lamp of appropriate thickness.

3. The integrated ceiling bath heating lamp should be installed in a suitable location. Generally, it should be placed in the center of the bathroom ceiling. It's best not to install it directly above the showering area because the heating speed of the bath heater is quite fast, and the bathing water is very hot. If it is installed directly above the showering area, it could easily cause burns.

In summary：the above is a detailed introduction on how to replace the LED light in an integrated ceiling bath heating lamp when it’s broken. I hope this helps those in need. When replacing the LED light, be sure to follow the correct steps to prevent any damage from incorrect operation.