Home / Blog Center / Chargers / Learn How to Repair Your Kitchen Faucet: Step-by-Step Disassembly
Learn How to Repair Your Kitchen Faucet: Step-by-Step Disassembly
06/02/2025 | Hawkrown
The faucet may develop faults after prolonged use, and to carry out repairs, it needs to be disassembled. Below, I will introduce how to disassemble and repair the kitchen hot and cold water faucet.
How to Disassemble and Repair Kitchen Hot and Cold Water Faucets
1. First, turn off the main water supply. After locating the red and blue dots on the handle, pry it open to reveal a small hole.
2. Observe the inside of the hole to see whether the screw is cross-shaped or straight. Use the corresponding screwdriver to loosen it.
3. After loosening the screw, remove the handle.
4. Once the large nut is disassembled, you can take out the valve core for repairs.
What to Pay Attention to When Installing Kitchen Faucets
1. Use Moderate Force for Installation
When installing, do not exert too much or too little force. The installation force should be appropriate. If the force is too little, the faucet may not be securely fixed, affecting its stability and sturdiness. Conversely, if the force is excessive, it may cause damage to the faucet.
2. Follow the Installation Sequence
Before installation, be sure to read the installation instructions. Install the parts in the correct order as specified. If not done in sequence, it may lead to issues such as leaks. Improper installation can also pose significant safety hazards.
3. Clean the Water Pipes
Before installation, check whether the inner walls of the water pipes are clean and free of impurities. If there are any contaminants or dirt, make sure to clean them thoroughly. If there is debris such as large sand particles in the pipes, it may contaminate the water quality and potentially cause blockages or damage.
Summary: The information about how to disassemble and repair kitchen hot and cold water faucets has been covered here. You can follow the above methods for disassembly, and be sure to protect the parts during the process. If you want to learn more related knowledge, you can follow us at Qijia.com for more inquiries.
