How to Fix a Toilet Tank That Keeps Running: Step-by-Step Guide

Toilet problems often arise during usage, such as a leaking water tank. So, how can you fix a toilet tank that continuously runs without retaining water? What should you do if there's a leak? Let's take a look.

How to Repair a Toilet Tank that Continuously Runs：

1、If the continuous running is caused by a crack inside the toilet, it cannot be repaired and you will need to buy a new toilet to replace it. To determine if there is a crack, first close the water supply valve to the toilet, then completely empty the tank. Next, pour colored dye into the tank and let it sit for half an hour. If you notice any colored water coming out, it indicates a crack.

2、If the leak is caused by a loose connection between the bottom of the toilet tank and the water pipe, simply reattach the connection tightly.

3、If the issue is due to aging internal parts, locate the specific part and replace it with a new one of the same model.

What to Do if the Toilet is Leaking：

1、If the leak is at the edge of the toilet, first remove all the adhesive from that area. Tilt the toilet at a certain angle to inspect the condition of the connecting seals and check for any damage. If damaged, simply replace it with a new seal and reapply adhesive. If the bottom is cement, you will need to pry it open, clean it, then apply a new layer of cement for waterproofing, and finally apply a layer of adhesive.

2、If the leak is caused by debris blocking the inside of the toilet, it is necessary to dismantle it to remove the obstruction, then secure it with adhesive. After the repair, avoid using the toilet or flushing for 24 hours to allow the adhesive to cure completely.

In summary：these are the steps for repairing a continuously running toilet tank and what to do about toilet leaks. I hope this information helps you. For more related content, please continue to explore the Hawkrown.