Fixing a Crooked Shower Water Outlet: Essential Tips

Water and electricity are very important hidden projects. If you encounter unreliable plumbers or electricians, it can seriously affect usage in the future. What should you do if the shower faucet's embedded head is crooked? Let's take a look.

1. What to do if the shower faucet's embedded head is crooked

You can purchase a suitable angle valve to adjust it back according to the size of the faucet. First, prepare the angle valve and decorative cap; next, turn off the water supply and dry any remaining water; then, use a wrench to loosen the faucet's nut and remove it, exposing the reserved joint; align the angle valve with the joint and tighten it; adjust it to the appropriate angle and distance, then fix it; after that, install the decorative cap; finally, reattach the faucet.

2. What are the precautions for installing a shower faucet?

1. Before installation, do not rush to mount it on the wall. First, turn on the water supply, and let clean water flow out to clear any debris and dirt from inside the pipes and installation joints. This way, it won't easily get blocked after installation. Also, check the installation accessories for any debris, shortages, or damage; otherwise, this will affect later use. Some debris could even damage the valve core, resulting in greater losses.

2. The process of embedding is very important because the outlet for bathing uses a valve that mixes hot and cold water. To avoid future unusability or poor performance, ensure consistency in the connections for hot and cold water pipes. As per regulations, generally, the left side is for hot water and the right side for cold water, ensuring a distance of 0.1 to 0.2 meters between them. The faucet can be adjusted during connection, but formal installation should wait until the wall is finished.

3. Under normal circumstances, when embedding a female thread joint, it should be at a 90-degree angle to the ground, and the faucet should be adjusted accordingly. This is to prevent the embedded faucet from being crooked. Therefore, it's advisable to buy the shower faucet in advance. However, once the joint is installed, the faucet should be removed, and all parts should be gathered together to prevent scratches on the faucet's surface.

In summary, this concludes the introduction about what to do if the shower faucet's embedded head is crooked and the precautions for installing a shower faucet. I hope the above content can help everyone. For more related information, please continue to follow our website, where we will present more exciting content in the future.