How to Easily Remove and Install Your Toilet Seat

Some homeowners may want to replace their regular toilet seat with a smart toilet seat but are unsure about how to uninstall and install it. Here are the steps for uninstalling and installing a toilet seat, which we hope will help you.

Steps for Uninstalling and Installing a Toilet Seat：

1、Uninstall the Toilet Seat

The regular toilet seat is fixed with screws. To uninstall, first locate the fastening screws and nuts, which are usually found under the toilet seat close to the tank. Once you feel the fastening screws, unscrew and remove the nuts from the screws. Then, lift the toilet seat straight up and remove it. After removing the seat, wipe the surface of the toilet with a cloth.

2、Prepare the New Toilet Seat

Unpack the new smart toilet seat and check for any damage or bumps. Before installation, place the toilet seat on top of the toilet to check if the size is appropriate, making sure all installation accessories are available. If the seat is too large or too small, contact the seller for an exchange.

3、Install the Toilet Seat

Usually, a smart toilet will come with a positioning card. Place the positioning card on the toilet; the hollow areas indicate where the fastening components will be installed. Align the fastening components with the screw holes on the toilet and insert the expansion screws into the mounting pads. Secure the pads onto the fastening components and tighten the expansion screws. Finally, push the smart toilet seat parallel into the fastening components.

4、Install the Hose

Before installing the toilet hose, turn off the water valve and press the toilet flush button to empty the toilet tank. This way, when you detach the water supply hose, there won't be any water leakage. Use a wrench to loosen and remove the hose connector from the water valve. Next, screw the bottom end of the filter into the water valve interface, and connect the detached hose connector to the water outlet on the bottom of the filter. Then, take a new hose; one end should be inserted into the water inlet interface on the toilet control panel and tightened. The other end connects to the water outlet on top of the filter. Finally, plug in the toilet and turn the water valve back on.

In summary：these are the steps for uninstalling and installing a toilet seat. We hope this article provides you with useful information. To learn more about related topics, please continue to follow our website.