Home / Blog Center / Chargers / How to Remove an Old Faucet That Is Too Tight to Unscrew
How to Remove an Old Faucet That Is Too Tight to Unscrew
06/02/2025 | Hawkrown
Many people are unsure of what to do when an old faucet is too tight to unscrew. Today, I will share some solutions for dealing with a stubborn old faucet.
How to Remove an Old Faucet That Is Too Tight to Unscrew
1. If you want to remove an old faucet that is too tight, you can first try to alternately twist it left and right. Then, use a wrench, which can help forcefully unscrew the stubborn faucet.
2. If the wrench doesn’t work, the faucet may have rusted. You should first ensure that all water valves are shut off, then apply a few drops of kerosene or machine oil at the connection point. Wait for the oil to penetrate and then attempt to twist it left and right with the wrench again.
3. If all else fails, it may indicate that the faucet is completely rusted. In that case, the faucet may no longer be usable. Prepare a small saw and carefully saw off the faucet. After that, apply some oil at the connection point, and if that doesn't work, soak the area in kerosene for a few minutes. Then, try to remove it using the wrench.
Now, let’s discuss some key considerations when choosing a faucet:
1. When using or purchasing faucets, it’s advisable to choose stainless steel materials to prevent the faucet from rusting in the future, which could lead to situations where it’s bonded and cannot be unscrewed.
2. When selecting a faucet, you can make reasonable judgments based on the faucet's material. It’s recommended to avoid iron faucets as they are prone to rust.
3. Be mindful of maintenance when choosing a faucet. Avoid using hard materials like steel wool to clean the faucet.
The above is a summary of what to do when an old faucet is too tight to unscrew. I hope this information will be helpful to you. If you have any other questions, please leave a message in the comments section below, and I will promptly assist you. I believe that through this article, you have gained some understanding of this issue. For more information, please continue to follow Hawkrown.com.
