DIY Repair: Leaky Faucet Handle Solutions

When the faucet at home has been used for a long time, it is likely to develop leaks, especially at the hot and cold water switch. How should we handle leaking at the hot and cold water faucet switch? Let's take a look together.

How to handle leaks at the hot and cold water faucet switch:

1. First, use a wrench to dismantle the faucet switch, then identify the cause of the leak. There are many reasons why a hot and cold water faucet switch might leak, and the measures to take will differ based on the cause. Once the faucet switch is disassembled, you can take out the washer to check if it is damaged.

2. If the washer is damaged, it will naturally lead to a leaking faucet switch. In this case, you should buy a new washer of the same specifications and model from a physical store. Remove the damaged washer and install the new one to solve the leak.

3. If the washer is not damaged, the issue might be due to a faulty valve core. In this instance, you should replace the damaged valve core with a new one. If possible, you may also choose to replace the entire faucet with a new one.

4. If the valve core is damaged, purchase a new valve core of the same specifications and model from a physical store. Remove the damaged valve core and install the new one. Before replacing the valve core, make sure to turn off the main water supply valve in your home to prevent large-scale leaks.

5. If you encounter difficulty when disassembling the faucet, you may need to use some lubricant. Drip some lubricant into the seams of the faucet and wait for a while, then use the wrench to turn the faucet clockwise. This should allow you to disassemble it without wasting water resources.

The above is a detailed introduction on how to handle leaks at the hot and cold water faucet switch. I hope it helps everyone solve the problem of leaking at the faucet switch. When leaks occur at the faucet switch, it is important to conduct repairs promptly to avoid wasting water resources.