How to Adjust the Toilet Flush Valve: A Step-by-Step Guide

Adjusting the toilet flush mechanism is not difficult; the key is to pay attention to some details to ensure normal use. Let's take a look at how to adjust the toilet flush mechanism.

How to Adjust the Toilet Flush Mechanism：

Open the lid of the toilet tank, and you will find the flush valve inside. On the surface of the flush valve, you will see a small mechanism marked with scales. By adjusting these scales, you can control the flow of water in the flush mechanism.

The scales on the flush valve are marked in blue and red. If you adjust it to the upper position, the flushing amount will decrease; if you adjust it to the lower position, the flushing amount will increase.

The two scales on the flush valve are connected to the buttons on the surface of the toilet tank, corresponding to large and small flush amounts. Therefore, when making adjustments, simply rotate both buttons to the maximum position.

If you feel that the flush amount is causing water waste in daily life, you can adjust the scales to the middle position to better control the water. Most toilets are set to the highest water amount when they leave the factory, so a slight adjustment is usually all that is needed.

Things to Note When Adjusting the Toilet Flush Mechanism：

1、Some people choose to set the flush mechanism to the minimum to conserve water. This is not correct. A low water amount may sometimes make it difficult to flush away waste, meaning you might need to flush several times, which ultimately wastes more water.

2、If the toilet is filling with water slowly during use, you can remove the filter inside the flush valve to check for any blockages. Just clean it thoroughly, being careful not to damage it during removal.

In summary：this is an introduction to how to adjust the toilet flush mechanism and what to pay attention to during the adjustment. Have you understood it? If there are any water amount issues with the toilet flush mechanism, it should be adjusted in a timely manner to ensure proper usage later on.