How the Two Buttons on Your Toilet Can Save Water

Toilet is a commonly used sanitary ware in bathrooms. When using it, you'll notice two buttons on top, the purpose of which many people may not fully understand. Let's take a look at the roles of the two buttons on a toilet and how to maintain it regularly!

Functions of the Two Buttons on the Toilet：

The two buttons include a larger button, often referred to as the full flush button, which offers a larger water volume. Pressing it once will release all the water in the tank, providing strong pressure and effective flushing, mainly used for larger waste. The smaller button is known as the half flush button, which uses a smaller amount of water. Pressing it once will not empty the entire tank; it will release about half or two-thirds of the water, primarily intended for urination.

Although both buttons can release water from the tank, it's important to choose the appropriate button during use to conserve water. Additionally, if the toilet experiences a minor blockage, pressing both buttons simultaneously can release all the water in the tank at once, greatly increasing pressure and flushing effectiveness, helping to clear blockages.

How to Maintain the Toilet：

1、Avoid Direct Sunlight and Heat

The toilet should not be placed in direct sunlight, and it should maintain a distance from heat sources or grease to prevent discoloration. It is recommended to use water between 1-45 degrees Celsius for rinsing the toilet. Never pour excessively hot water, as it could cause the toilet to crack.

2、Be Mindful of What Goes in the Toilet

Avoid disposing of newspapers, diapers, or other items in the toilet, as these can cause blockages. Regularly clean the toilet seat with a soft cloth, but do not use strong acidic cleaners that could corrode the pipes. Avoid scraping with blades or hard objects to prevent damaging the glaze and affecting its appearance.

3、Cleaning the Tank

Do not use chlorine-based cleaners inside the tank, as they can damage the internal mechanisms, leading to leaks or structural damage. It's best to clean the filter once a month to avoid slow water inflow. If the local water quality is hard, be aware that impurities in the water may clog the toilet's drainage holes, requiring timely cleaning.

4、Regularly Clean the Surface

Use a long-haired brush with neutral detergent to clean the surface, pipes, and flushing holes of the toilet each week. Additionally, the toilet lid is an important component that should be checked regularly. If the seal is loose, it should be tightened promptly.

In summary：the above information explains the functions of the two buttons on the toilet and how to maintain it daily. We hope this helps those in need. If you would like to learn more related knowledge in the future, feel free to follow our updates！