The Dos and Don'ts of Using Glue for Toilet Installation

It is well known that installing a toilet is not something that can be done casually. So, what adhesive should be used to bond the toilet to the floor? Let's take a look together.

How to Use Adhesives to Ensure Your Toilet is Securely Mounted：

1、Many people use silicone sealant for sealing. First, make sure to clean the floor thoroughly. Then, align the toilet's drainage outlet with the sewage pipe and place it vertically. After that, press the silicone sealant into the joint between the floor and the toilet.

2、You can also use real ceramic adhesive, which has very good bonding properties and will not become discolored like silicone sealant over time. Additionally, it does not harbor bacteria and can achieve effective sealing and isolation.

Things to Note After Installing the Toilet：

1、After the toilet is installed, it cannot be used immediately. This is mainly because the adhesive has not fully cured and bonded together. Therefore, you must wait 2 to 4 days after installation before using the toilet. Also, be careful not to place any objects or water near the toilet after installation, as this may adversely affect the quality of the silicone sealant.

2、Pay attention to the water absorption rate. The difference between high-temperature and medium/low-temperature ceramics is very apparent in their water absorption rates. High-temperature ceramics have a water absorption rate of less than 0.2%, while medium and low-temperature ceramics have a significantly higher absorption rate, making them prone to absorbing wastewater, difficult to clean, and generating unpleasant odors. Over time, this can lead to cracks and potential leaks.

3、It is important to clean the toilet promptly after use, as there may be some adhesive residue on the surface following installation. Keeping the toilet clean is crucial. Additionally, make sure to flush the toilet immediately after use to prevent stains from forming.

4、You can place a cotton ring around the toilet, which will help prevent direct contact with the cold toilet seat while using it. However, make sure to clean the cotton ring regularly.

Conclusion：That’s all for the information regarding what adhesive to use for bonding the toilet to the floor. If you want to learn more, please continue to follow us for further exciting content.