Home / Blog Center / Chargers / How to Fix a Loose Toilet and Floor: A Step-by-Step Guide

How to Fix a Loose Toilet and Floor: A Step-by-Step Guide

23/01/2025 | Hawkrown

Toilet usage is very frequent, so in addition to purchasing high-quality toilet products, proper installation is also crucial. Otherwise, after some time, issues may arise. For example, what to do if the toilet has become loose from the floor? Let's take a look together.

What to Do if the Toilet is Loose from the Floor:

1、No Water Leakage

If the toilet is loose but there is no leakage, it is recommended to first use a utility knife to remove the original sealant from the bottom of the toilet. Then, reapply sealant evenly at the junction of the toilet base and the floor. Wait for 24 hours to ensure the sealant has fully cured before using the toilet again.

2、Toilet is Loose and Leaking

This situation could be caused by an aging seal ring. First, detach the toilet from the floor, then wipe the bottom of the toilet and the floor clean with a dry towel. Replace the seal ring and finally secure the toilet with sealant or cement. Note that you need to wait for 7 days before using the toilet again, which is a relatively long time.

3、Uneven Floor

If the unevenness of the floor is the cause of the toilet's loosening, you will need to remove the toilet and level the floor base. After leveling is completed, reinstall the toilet.

Toilet Installation Precautions:

1、After installing the toilet, you should not use it right away. Wait for the sealant to fully cure before adding water. The curing time is 24 hours. Be careful not to use cement as an adhesive, as it has expansion properties that may lead to cracking or misalignment of the toilet base over time.

2、After installing the tank components, first check whether the tank is functioning correctly with no leaks. Check if the inlet valve is working properly and whether the valve installation is flexible, among other things.

3、The flushing performance of the toilet is crucial. Once the tank components are installed, fill the tank with water and test the flush. If the water flows quickly and creates a strong whirlpool, it indicates that the drainage is smooth. Otherwise, check for any blockages.

Conclusion:This information regarding what to do if the toilet is loose from the floor has been introduced. I hope it helps everyone. For more related knowledge, please continue to follow the Hawkrown website consultation platform.

Contact Us

Submission Successful

ok