DIY Guide: Installing Your Own Bathroom Faucet

Installing a new basin faucet at home requires following certain steps. Here’s a detailed guide on how to install it:

How to Install a Basin Faucet

1. First, check if all the components of the basin faucet are complete. Before installation, clean the surrounding area and ensure that there is no dirt around the pipeline to ensure that the water supply line is clean.

2. Next, take out the rubber gasket and insert the water inlet pipe, then tighten it. There is a water supply hose next to it that needs to pass through the threaded joint. Then connect the second water supply pipe by passing its water inlet end through the joint and connecting it with the water supply port.

3. After that, insert both water supply pipes through the rubber gasket, attach the lock nuts, and tighten both pipes and the valve. The orientation of the connection should also be tight, but do not apply excessive force to avoid deformation. Finally, open the water valve to check for any leaks. If there are no leaks, it means the basin faucet has been installed properly.

How to Fix a Leaking Faucet

1. The faucet is one of the most frequently used fixtures in the home, and over time, it is likely to develop leaks. First, we need to identify the location of the leak and the cause.

2. Sometimes, it may be due to neglect in turning off the faucet properly, in which case simply tightening it will suffice without the need for repairs. However, if the problem is caused by a damaged or aged gasket, open the faucet, use a wrench to loosen the outer screw, find the aged gasket inside, and replace it.

3. If there is damage and surrounding leakage, first clean the area to keep it dry and tidy, then apply glass adhesive for sealing. However, if it still leaks, it could be a problem with the valve core, and we may need to replace the entire valve core to effectively stop the leak.

In summary, installing a basin faucet is relatively simple. As long as we prepare all the necessary components and tools and follow the steps above, we can successfully install the faucet.