How to Fix a Broken Toilet: A Step-by-Step Guide

In daily life, it’s quite normal for a toilet to break down. So the question arises, how can we fix a broken toilet? Let’s explore some related knowledge about toilets together.

How to Repair a Broken Toilet：

1、Toilet Clogging

If your toilet is clogged, you can use a bamboo stick to reach into the toilet for unclogging, or you can dissolve caustic soda in water and pour it into the toilet. After waiting for about ten minutes, the toilet should unclog automatically.

In addition to these methods, you can also use oxalic acid or a simple plunger to unclog the toilet. If it remains clogged, it may be best to call a professional, as this can save you time.

2、Broken Flush Valve

If the toilet button won’t pop back up, it indicates that the flush valve is broken. You can measure the height of the toilet tank’s inner wall and the diameter of the drain hole to determine the size of the flush valve you need to buy. After purchasing a new flush valve, first remove the top part of the drain assembly, then loosen the screws at the bottom, and take out the bottom metal plate.

Align the bottom of the new flush valve properly with the drain hole, position the metal plate at the correct angle, and tighten the screws. Finally, reassemble the top part of the drain assembly.

3、Broken Toilet Seat

As the toilet seat ages, it is likely to get damaged and will need to be replaced. When buying a new toilet seat, make sure to measure the length and width first. Then, loosen the screws at the back of the toilet to remove the old seat, and finally, install the new seat and tighten the screws.

4、Toilet Leaking

If the toilet is leaking while in use, start by checking the float ball. Raise the float arm; if the water flow stops, it might indicate friction between the float ball and the side wall of the tank. A slight bend in the float arm may resolve the issue.

If this isn’t the cause, remove the float ball to check for any water ingress or damage. If water has entered the float ball, you should empty it. If it’s damaged, you will need to replace it, ensuring to pay attention to the quality of the new float ball to avoid a short lifespan.

In conclusion：after reading the above information, I believe you now have a better understanding of how to fix a broken toilet. For more related information, please continue to follow our website, as we will present more exciting content in the future.