Top Benefits of Using a Faucet-Mounted Water Heater

Have you noticed that some faucets are connected to a device that can produce hot water when the faucet is turned on? What is this device called? Let’s take a look.

What is the hot water heater connected to the faucet called?

This is called an electric hot water faucet, specifically designed for areas such as kitchens and bathrooms where hot water supply is not available. This type of faucet can produce hot water within 3-5 seconds of being turned on, with no special installation needed. You can adjust the temperature and flow regardless of whether it's hot or cold, as long as the power is turned on. It is not only energy-efficient and environmentally friendly but also aesthetically pleasing, compact in design, and space-saving, making it a common small household appliance in modern family life.

Installation Procedure

1. Choose the right materials

Before installing the electric hot water faucet, you need to choose a high-speed electric water heater with specific sizes and styles based on the specific conditions of the installation environment. Don’t forget to separate the top and bottom sockets; the bottom water outlet type of the electric hot water faucet needs to be mounted through a hole in the wall, while the bottom outlet can be placed directly under the sink.

2. Prepare the tools

The basic tools you will typically need include a metal hose, a three-way connector, an angle valve, a wrench, and raw material tape. If you don’t have these, you'll need to purchase them from a hardware store in advance.

3. Cut off the water and electricity

To ensure there is no leakage during disassembly and installation, you must turn off the water supply. It is also advisable to cut off the power supply when securing the electrical wires to avoid accidents caused by the combination of water and electricity.

4. Installation

Remove the original faucet from your home, and then connect the water faucet to the high-speed electric water heater according to the installation diagram. If you are not very skilled, be careful while wrapping the raw material tape to prevent leaks.

5. Secure the electrical wires

Plug the power supply into the socket and use a wire clamp to secure the wires to the wall to prevent them from loosening and becoming tangled in the future.

6. Water temperature testing

Turn the handle to let the water flow out and ensure there are no leaks from any parts. Then switch it to the hot water position; once the water flows out, turn it on, and the heating indicator light will illuminate, indicating that heating has begun, which confirms that the installation is complete.

In summary: The above content explains what the heater attached to the faucet is called. I hope this helps everyone understand. For more information on this topic, you can continue to follow Hawkrown.com.