How to Replace a Broken Three-in-One LED Bathroom Heater Light

Most families will install a bathroom heater, also known as a bath bulb, to enhance comfort while taking a shower. If the three-in-one LED light of the heater is broken, how can it be replaced? Let's take a look.

How to Replace a Broken Three-in-One LED Light in a Bathroom Heater

Firstly, disconnect the power to the heater. Use a suction cup to remove the surrounding ceiling panels of the integrated ceiling next to the heater. This will allow you to open the outer shell of the heater. Once the outer shell is open, you can remove the central lighting unit and replace it with a new lighting component of the same model as the original LED. Then, reassemble the outer shell and restore the ceiling panels to their original state.

Tips for Choosing a Bathroom Heater

1. The quality of the lampshade is very important for the functionality of the bathroom heater. A high-quality lampshade should have a moderate thickness, a smooth surface, and high heat resistance and flame retardance. For example, some heater lampshades made from plastic materials can withstand high temperatures of up to 200 degrees, which is not comparable to products made from PPO or ABS plastics.

2. The power of the heater should be determined based on the size of the bathroom and the installation height. An excessively high power will waste electricity, while too low a power will be ineffective. Generally, for a bathroom of around 4 square meters, a heater with a 25W heating lamp is recommended.

3. When purchasing the heating element for the bathroom heater, it's important to check the heating components. This is because explosion-proof bulbs must be made of high-explosion-proof materials, specifically quartz. Quartz has excellent waterproof and explosion-proof properties, making it very suitable for heating lamps. However, due to the special properties of the crystal structure of quartz material, the cost is relatively high.

4. There are different brands of bathroom heaters, which vary in quality and appearance, leading to significant differences in price. Therefore, it's advisable to compare different options. Currently, a heater with four bulbs is priced around 500 yuan, with some being slightly higher while others may be lower. Additionally, the bulbs for the heater are roughly around 100 yuan.

In summary：I have briefly introduced the method for replacing a broken three-in-one LED light in a bathroom heater. I hope everyone finds this information helpful. For more content, you can continue to follow our website.