Why Heat Lamps are Prone to Burnouts: Common Reasons and Solutions

When using a warm air bathroom heater, if it tends to burn out easily, there are several reasons that could cause this issue.

Why Heat Lamps are Prone to Burnouts: Common Reasons and Solutions

1. It is possible that the electrical wiring has a poor connection. If used for a long time, this can easily lead to burning out. In this case, you should first disassemble the wiring of the heater to check for any bad connections. If you find such a problem, you need to reconnect it properly.

2. Another possibility is that the power of the warm air bathroom heater does not match the rated current. If the power exceeds the rated current, it can easily lead to burnouts. In this situation, you need to replace it with a heater that has a suitable power rating and should not use the current one anymore.

If the lamp of the warm air bathroom heater is not lighting up, what should you do?

1. If this happens, it is highly likely that the lamp tube is damaged and needs to be replaced with a new one. Make sure to replace it with a lamp tube that has the same size and specifications as the original. First, remove the cover panel, then take out the damaged lamp tube and install the new one.

2. It may also be due to a power outage at home. You can try turning on other electrical devices to see if they work. If they also don’t work, it means there is a power outage or the circuit breaker has tripped. You need to reset the circuit breaker in your home.

How to replace a broken lamp?

1. First, locate the cover panel on the bathroom heater and remove it. You can do this by opening the hidden clips around it. Using a screwdriver, you can easily pry open the clips to remove the cover panel.

2. Once removed, you will see the lamp tube inside. You can pull the lamp tube out of its base to take out the broken one, and then use the same method to install the new lamp tube back into the base. After that, reattach the cover panel. However, it’s best to turn off the power before operating to prevent any risk of electric shock.

In summary：the above information explains the reasons why a warm air bathroom heater tends to burn out and how to fix or replace a broken lamp. We hope this information is helpful, and for more content, you can follow our website.