Replacing Your Faucet Cartridge: A Complete Tutorial

When frequently used, the internal valve core of a faucet can easily get damaged and needs to be replaced in a timely manner. So, how do you replace the valve core of a hot and cold water faucet? Let’s take a look.

How to Replace the Hot and Cold Water Faucet Valve Core

1. Prepare your tools, turn off the main water supply, loosen and remove the screws, and then pull off the handle.

2. Next, remove the cap of the valve core. You will be able to see the latch inside the valve core clearly. Use pliers to grab the two claws on the top and twist them clockwise to unscrew.

3. Remove the old valve core and install the new one. Finally, reinstall all the components.

What to Pay Attention to When Installing a Faucet

1. Installation of Basin Faucet

When installing, choose an appropriate size for the water outlet, ensuring that the distance between the faucet's water outlet and the sink is maintained at around 8-10 cm. Additionally, select a suitable angle valve and secure it with both the hot and cold water pipes.

2. Installation of Shower and Bathtub Faucet

Many families now have bathtubs installed, and a faucet is essential for any bathtub. It is important to install a wall-mounted faucet, paying attention to the height during installation. The distance between the hot and cold water pipes should be maintained at around 15 cm.

3. Concealed Installation of Shower and Bathtub Faucet

For aesthetic purposes, many families choose to install bathtub faucets in a concealed manner. During operation, the valve core should be installed within the wall of the bathroom. If the wall is too thin, installation is not feasible.

4. Installation of Thermostatic Faucet

Before installation, it is crucial to determine the direction of the hot and cold water pipes to avoid misconnection, which would affect the faucet's functionality. If using a gas water heater, ensure that the water pressure is adequate; otherwise, this type of faucet cannot be used, so pay attention when purchasing.

5. Installation of Single-Hole Kitchen Faucet

Since kitchen faucets are frequently turned on and off, they must be installed securely, and it is important to purchase reliable quality products to extend their service life.

In summary, the above content explains how to replace the valve core of a hot and cold water faucet. I believe everyone now understands! The valve core is a crucial component, so once a malfunction occurs, it should be replaced promptly to avoid issues with the faucet's normal operation.