Managing Overheating Issues with Electric Hot Water Faucets

Electric instant water heaters are convenient faucets that allow users to adjust the water temperature based on actual needs. Below, I will introduce what to do if the temperature of the electric instant water heater is too high.

What to do if the temperature of the electric instant water heater is too high

Adjust the water flow rate. The temperature of the electric instant water heater is determined by the flow of water. You can use the handle to control the flow rate. Generally, if the water flow is high, the temperature will be lower; if the water flow is low, the temperature will be higher. Be careful not to set the water flow too low to avoid overheating.

Precautions when using an electric instant water heater

1. When installing the electric instant water heater, be sure to use a three-prong outlet with a grounding wire. Do not use a two-prong outlet without a grounding wire as this may lead to safety hazards, especially if the wiring is too short. Using a power strip is a more appropriate option in such cases.

2. It is also essential to install a leakage protection switch when setting up the electric instant water heater to ensure electrical safety. Usually, the electric capacity of most households is relatively small, so it is advisable to avoid using the water heater simultaneously with high-power appliances.

3. Remember, the faucet must be installed vertically. Horizontal or inverted installation may pose safety risks. The heating element at the bottom heats the water, and the warm water relies on the heating element to distribute heat. If it is placed horizontally or upside down, it may damage the heating element.

4. Typically, a qualified instant water heater undergoes over 50 tests, which include checks for leakage, insulation, etc. However, a small number of manufacturers in the market may not meet these standards, and some smaller-scale manufacturers may produce products with quality issues.

In summary, the above content introduces what to do if the temperature of the electric instant water heater is too high. You can adjust the water flow rate, as the temperature of the electric instant water heater is determined by the water flow.