How to Disconnect Two Flexible Hoses from a Faucet

Generally, a faucet needs to be connected with two hoses for proper use. When it comes to replacing the hoses, here's how to disassemble the two hoses of a faucet.

How to Disassemble Two Hoses of a Faucet

1. First, close the hot and cold water valves under the sink to facilitate disassembly.

2. Next, use a wrench to unscrew the connections between the hot and cold water pipes and the faucet.

3. Then, remove the two screws that secure the faucet in place.

4. After removing the two rubber washers, you can take off the hoses, and the faucet will be disassembled.

How to Maintain a Faucet

1. Have Professionals Install It

Before installation, make sure to clean the inside of the pipes. During installation, avoid hitting the faucet with hard objects, and make sure no concrete, strong adhesives, or other damaging substances are left on the surface.

2. Avoid Forcing the Faucet Shut

Many people have the habit of forcefully turning off the faucet after use, which is incorrect. For traditional faucets, it is important to avoid using excessive force to prevent leaks and potential damage to the sealing valve. The correct method is to gently rotate the handle.

3. Good Habits Keep the Faucet Like New

After using the faucet, develop the habit of wiping it with a soft cloth to remove any residue. If too much dirt accumulates, it can shorten the faucet's lifespan and affect its appearance. Pay attention to the operation of the handle during use.

4. Clean Surface Dirt Promptly

If you notice that tap water has become severely contaminated and cold water isn't sufficient for cleaning, you can use a more effective method: dip a cloth in a small amount of whitening toothpaste and wipe the faucet's surface before rinsing it with cold water and then drying it with a towel.

In conclusion, this overview on how to disassemble the two hoses of a faucet covers the essential details. You can follow the methods described above to perform the disassembly, paying particular attention to the finer points during the process.