Understanding the Gurgling Noise from Your Toilet After a Flush

The toilet is an essential bathroom fixture in our daily lives, and cleaning and maintenance should be prioritized. So, what causes a gurgling sound after flushing the toilet? And how can we effectively clean toilet stains?

What Causes a Gurgling Sound After Flushing the Toilet：

1、One possible reason for the gurgling sound is a blockage at the bottom of the toilet. During use, debris such as tissues may clog the outlet, reducing the water flow and causing the gurgling noise during flushing.

2、In high-rise buildings, if only a sewage pipe is installed without an air vent, a gurgling sound may occur when draining.

3、If the drainpipe of the toilet is blocked at the bottom, air may bubble up when flushing, resulting in a gurgling sound.

How to Clean Toilet Stains：

1、Toilet Cleaner Method

For daily toilet cleaning, using a toilet cleaner is common. First, clean the surface of the toilet, then apply the toilet cleaner to the stained areas. After soaking for a few minutes, scrub with a brush and rinse thoroughly with water.

2、Baking Soda Method

Many people also use baking soda to clean toilet stains, which is quite effective. First, sprinkle baking soda on the stained areas, then pour hot water over it. After a few minutes, use a brush to scrub the stains and rinse thoroughly.

3、Vinegar Method

Vinegar, known for its antibacterial properties, can also be used to clean toilet stains. Mix vinegar with water in a certain proportion, pour it into the toilet, and let it sit for a while before scrubbing it clean. This method is especially effective for toilets that have yellowed inside.

In summary：the above discusses the reasons for the gurgling noise after flushing the toilet and how to clean toilet stains. I hope this information is helpful. For more related content, please continue to follow Hawkrown.com.