Easy Steps to Install Your Squat Toilet

Some people install squat toilets in the bathroom. The installation process for a squat toilet can be divided into the following four steps. Below, I will briefly introduce each step.

How to Properly Set Up a Squat Toilet in Your Bathroom：

1、Positioning

First, determine the installation position of the squat toilet. When laying a waterproof protective layer on the bathroom floor, you can leave a large pit where the squat toilet will be installed. This pit is usually larger than the size of the squat toilet. Alternatively, once you have decided on the installation position, you can directly use a hammer, cutting machine, or chisel to create a pit in the ground.

2、Product Inspection

Before installation, we need to inspect the product. For example, check whether the product model and brand are correct, whether the product surface is smooth and delicate without any spots or defects, and whether the accessories are complete.

3、Installing the Squat Toilet

Before installing the squat toilet, drill a small hole at the junction of the drainage pipe and the floor, and place a steel wool ball in the hole. Then, use semi-dry mortar to secure it, allowing water from the waterproof layer to drain out. Next, take the water supply pipe from the squat toilet, connect the straight and bent pipes, and insert a sealing flange on one end of the water supply pipe. Fit this flange into the water inlet hole of the squat toilet. The next step is to align the squat toilet's drainage hole with the drainage pipe and place it correctly. Use a ruler, level, or other tools to check that the squat toilet is level. If necessary, you can place bricks under the squat toilet to stabilize it. Finally, use semi-dry mortar to secure it in place.

4、Installing the Water Tank

First, install the flush valve and the water inlet valve inside the water tank, then cover the water tank with its lid. Next, use a ruler to determine the installation height of the tank hooks, place the hooks on the wall, mark the drilling positions, and drill holes using an electric drill. Install the screws. Then, attach the hooks to the back of the water tank. Tighten the connecting cup at the water outlet of the tank, align the squat toilet water supply pipe with the cup at the water outlet, and place it correctly. Fix the water tank to the wall. Lastly, install the toilet triangle valve and connect the water supply hose to the valve and the toilet's water inlet.

In summary：this is a brief introduction to how to install a squat toilet. I hope this article provides you with reference and assistance for installing a squat toilet in the future. For more related information, you can continue to follow Hawkrown.com.