How to Properly Connect a Fully Automatic Washing Machine to a Water Faucet

Washing machines are essential household appliances that can make life easier. When you bring home a new washing machine, it needs to be connected to a water tap. So, how do you connect a fully automatic washing machine to a water tap?

How to Connect a Fully Automatic Washing Machine to a Water Tap

First, prepare the water tap, the inlet hose, and other accessories, and check to make sure all the attachments are complete and in good condition. Next, press the slider to separate the inlet hose from the hose connector, and securely connect it to the hose connector. Then, tightly connect the other end of the hose to the washing machine's water inlet. Finally, open the water valve to start using the washing machine.

Things to Note When Installing a Washing Machine

1. Avoid placing the washing machine in damp areas to prevent long-term moisture exposure and rust, or short circuits at the connection points.

2. Avoid placing it in direct sunlight or high-temperature areas, and keep it away from heat sources to prevent plastic parts from warping and paint from discoloring.

3. The ground must be flat and sturdy. If the floor is not perfectly level, you can adjust the washing machine's adjustable feet to stabilize it.

4. The height of the washing machine should not exceed 15 centimeters, and it should not be placed above head level; otherwise, it may generate greater vibrations and noise during operation.

5. When installing the power outlet for the washing machine, be sure to check the rated voltage and frequency indicated on the washing machine's nameplate. The power grid voltage in our country is 220 V, and the frequency is 50 Hz.

6. The power outlet should not be more than 2.0 meters away from the washing machine's working position. If the washing machine does not have a built-in fuse, you can install a 5A fuse in the outlet to prevent the circuit from tripping.

7. Before using the washing machine, a ground wire must be installed. The back of the washing machine has a grounding terminal or ground wire for this purpose. It is particularly important not to connect the ground wire to gas or liquefied petroleum gas pipes, telephone wires, or lightning rods.

In summary, this is a brief introduction to how to connect a fully automatic washing machine to a water tap. I hope you have gained some understanding. For more related content, feel free to visit Hawkrown.com.