How to Fix a Toilet That Won't Flush Properly

Many people find it frustrating when the toilet doesn't have enough flushing power. So what can be done if the toilet lacks suction and fails to flush properly? Let's take a look at some solutions.

What to Do When Your Toilet Lacks Suction Power：

1、Adjust the Water Level in the Tank: If there isn't enough water in the tank, it can lead to low flushing power. In this case, turn the screw on the fill valve clockwise to raise the water level to a certain height, increasing both the water volume and the flushing force.

2、Adjust the Flange Ring: If the flange ring wasn't installed correctly when the toilet was set up, it can also cause low flushing pressure or drainage blockages. In such cases, it is necessary to have a professional adjust it.

3、Unclog the Drain: If the pipes are clogged, it will reduce the flushing power. Ensure the pipes are cleared before using the toilet.

How to Unclog a Toilet：

1、Minor Clogs: If there is a minor clog, a great solution is to use a plunger. Point it towards the drain and push down forcefully. The suction created will push air out, and when you pull the plunger out, it can help remove any obstructions in the pipe, effectively clearing the drain.

2、Moderate Clogs: If the toilet is clogged but a plunger and cleaner don't work, you can buy a drain cleaner and pour it into the toilet. Cover the toilet and wait a few hours, then flush it clean. Drain cleaners can soften some of the debris inside.

3、Severe Clogs: If the toilet is severely clogged and various methods have failed, it's advisable to call a professional to unclog the drain. Do not attempt to force it yourself, as this could make the blockage worse.

In summary：today we discussed what to do when the toilet lacks suction and how to unclog it. For those interested in more information, please continue to follow our updates, as we will provide more exciting content in the future.