The bathroom faucet is broken, how to replace it

If the bathroom faucet is damaged after prolonged use, it needs to be replaced. Let’s learn how to replace a broken bathroom faucet.

The bathroom faucet is broken, how to replace it

1. Turn off the water supply by closing the shut-off valve under the sink.

2. Open the faucet to drain any remaining water from the pipes.

3. Use a wrench to disconnect the water supply hose from the faucet, and remove the hose.

4. Use pliers to loosen the locking nut that secures the faucet.

5. Remove the faucet.

6. Install the new faucet by following the disassembly steps in reverse order.

Now, let's discuss how to choose a suitable bathroom faucet.

1. Check the weight

When selecting a faucet, lift it to feel its weight. If it feels very light, it’s advisable not to purchase it, as such faucets are often made with less brass to reduce production costs. While the exterior may look fine, a lightweight faucet can pose a risk of bursting pipes over time.

2. Examine the handle

Be sure to closely examine the quality of the faucet handle. It should be smooth and shiny, and operate easily. If the handle lacks luster and feels stiff, it’s best to avoid that faucet. A widely used option is the composite handle, which allows users to operate the faucet conveniently with one hand while their other hand is free.

3. Inspect the spout

Carefully observe the faucet’s spout. If the faucet is installed at a high position, ensure that the spout can fill the sink adequately. If it cannot fill the sink, reconsider purchasing it.

That’s a detailed introduction on how to replace a damaged bathroom faucet and how to choose a suitable one. I hope this helps answer your questions. For more related knowledge, you can continue to follow us at Hawkrown.com.