Common Issues with Electric Water Heaters: Low Water Flow Problems

Many households are now equipped with electric hot water faucets, but after prolonged use, various issues may arise. One common problem is a decrease in water flow. Here’s an overview of why this happens and some additional insights.

Why is the Electric Hot Water Faucet Flowing Slowly

1.Clogged Filter**: The filter may become obstructed by scale buildup. In this case, you need to use tools to remove the filter, clean it with a brush, and then reinstall it.

2.Clogged Faucet**: If the faucet itself is clogged, simply clean the internal filter. If it isn’t clogged, the issue may lie in the pipeline, which may need to be cleared of impurities.

3.Damaged Faucet**: Over time, components inside the faucet may wear out, leading to reduced water flow. In this case, you will need repairs or to replace the unit entirely.

Advantages of Electric Hot Water Faucets

1.Instant Hot Water**: If you wish to use hot water, it heats up in just 5 seconds and can be used continuously throughout the day at any time.

2.Safety Features**: It comes equipped with advanced leakage protection that can automatically cut off the power within 0.1 seconds if a current leak occurs, ensuring safety.

3.Leak Prevention**: The design employs a direct current passage and high-pressure sealing system to prevent leaks.

4.Water Conservation**: These faucets are efficient in water usage, often saving about 30% of energy. Since there’s no need to waste cold water waiting for it to heat up, each usage can save between 2.5 to 5 liters of water, making them quite economical.

Disadvantages of Electric Hot Water Faucets

1.Low Flow Rate**: While the heating speed is fast, the water flow is limited, and the efficiency is low due to high power consumption (typically around 3 kilowatts). This means that while the water heats rapidly, it cannot be combined with cold water to ensure comfort.

2.Scaling Issues**: These faucets are prone to scaling if used with high-temperature water, which can affect their lifespan. Calcium and magnesium ions can accumulate inside the units, and if the power is turned off while the water temperature is still high, scaling may occur.

In summary, the above outlines the reasons for reduced water flow in electric hot water faucets. As can be seen, there are multiple potential causes for this situation, and it’s crucial to diagnose the issue accurately when addressing it to minimize damage to the faucet. We hope this information is helpful.