Common Issues with Pull-Down Faucets and How to Fix Them

The pull-out faucet may encounter various issues after prolonged use. At this point, it is essential to take corresponding measures to repair it. So, how to fix a broken pull-out faucet?

DIY Repair: Fixing Your Broken Pull-Out Faucet

1. If the faucet shows signs of water splitting or reduced flow rate without bubbles, it may be due to a clogged aerator filter caused by limescale buildup. In this case, the faucet should be disassembled, and the filter cleaned thoroughly.

2. If the faucet is making noise, the possible reasons could be high water pressure, rapid closure of the handle, poorly secured hot and cold water pipes, or limescale blockage in the inlet pipe. To resolve this, reduce the water pressure, avoid rapid faucet closure, and clean the pipes to ensure proper contact between the water pipes and fittings.

3. If you are unable to adjust the temperature or if the water temperature is unstable, this could be due to excessive pressure in the hot and cold water lines or the hot water heater taking too long to heat. You should lower the pressure on the hot and cold angle valves to achieve a balanced pressure and ensure the water temperature keeps up with the flow rate.

Now, what are the maintenance tips for faucets?

1. If you find the handle malfunctioning in temperatures below zero, you should pour hot water over it to restore normal function; otherwise, it may shorten the lifespan of the faucet's valve core.

2. If the faucet drips after being tightened, it is generally due to residual water in its internal chamber and is considered normal. However, if it continues to drip over time, it may indicate a leak, pointing to low-quality products.

3. Since water contains a small amount of carbonic acid, it can easily form limescale on the metal surface, leading to corrosion and affecting both cleanliness and durability. Therefore, regularly clean the faucet with a sponge or cloth dampened with neutral soap water.

In summary, these are the repair methods for a broken pull-out faucet. As indicated in the article, different problems require different solutions. When carrying out repairs, it's essential to address the specific issue to avoid similar problems in the future. I hope this information is helpful to everyone.