Sealing Toilet Seat Screw Holes: Tips and Best Practices

Toilet is one of the essential fixtures in the bathroom, but there are many considerations when installing a toilet; otherwise, it can affect its use. Should the fixed screw holes at the back of the toilet be sealed? What should be noted when installing a toilet? Let's take a look!

Should the fixed screw holes at the back of the toilet be sealed：

Yes, when installing the toilet, you can ask the installer to use materials like silicone sealant to seal them. In the past, with older toilets, the base was often unstable and required expansion bolts for fixing. However, modern toilet bases are generally stable enough that they can be fixed directly with silicone sealant. Therefore, it's advisable to use sealant to close these two holes to prevent unpleasant odors.

Before installing the toilet, measurements should be taken to ensure proper installation. When fixing the toilet, the floor must be sealed with silicone sealant to ensure a good seal with the bottom of the toilet. This prevents future leaks or odors. Additionally, the toilet should not be used for about three days after installation, as this can affect its stability. If any damage occurs due to improper equipment handling, the liability falls on the equipment owner.

What should be noted when installing a toilet：

1、Before installing the toilet, check the sewage pipe for mud, paper, or other debris, and ensure the floor is even. If the floor is uneven, it needs to be leveled. Also, flip the toilet over and draw a center line for the toilet's discharge outlet to ensure the toilet's discharge outlet aligns with the drainage pipe, and secure it with floor bolts before sealing.

2、When installing the toilet's drainage outlet, a sealing ring should be installed to prevent odors from escaping, or you can apply a ring of silicone sealant around the toilet's base, let it sit for 3-5 minutes, and then flush it with water to ensure the drainage pipe is clean and unobstructed.

3、When installing the toilet angle valve or water tank components, check the cleanliness and sealing of the water supply and ensure that the buttons operate smoothly without any leaks before considering the installation complete.

In summary：the above content discusses whether the fixed screw holes at the back of the toilet should be sealed and what to note during toilet installation. I hope this information helps those in need. If you want to learn more related knowledge in the future, feel free to follow Hawkrown Network's news.