Unlocking Your Warm Bathroom Heater: How to Take Apart the Panel

Many households install warm air bath heaters in their bathrooms, which are convenient to use and provide warmth in the winter. So, how do you remove the panel of a warm air bath heater? Let's take a look!

How to Disassemble the Panel of a Warm Bathroom Heater: A Step-by-Step Guide

1. Remove the bulbs

First of all, make sure to turn off the power to the heater to avoid the risk of electric shock. Once the power is off, remove the four heating bulbs from the heater. Be gentle while disassembling to prevent the bulbs from breaking. Generally, the heating bulbs have screws on them, and you just need to unscrew these to easily take them out.

2. Remove the lamp cover panel

After taking out the bulbs, place them in a safe location, as they are fragile and can easily be damaged. Next, you will notice a spring hook on the lamp cover; just loosen the hook to remove the lamp cover panel. If there is a lot of dirt on the cover, it’s important to clean it promptly, as excessive dirt can affect the airflow.

3. Check the light tubes

Once the panel is removed, you can see the light tubes inside. Carefully check if the tubes are damaged; if they are, they need to be replaced, as damaged tubes will affect the lighting.

4. Remove the light tube

If the tube is damaged, you will need to take it out. Use a screwdriver to press against the metal piece next to the light tube while pulling it out with your other hand.

5. Replace the light tube

Before replacing, make sure to check the model of the light tube carefully and buy a new one that matches the specifications; if the model doesn’t match, it won’t install properly.

In summary：the above is about how to remove the panel of a warm air bath heater. I believe everyone understands now! The process of disassembling the heater panel is relatively simple, but it does require some techniques. If you are inexperienced, it is best to seek help from a professional technician when disassembling.