A Complete Guide to Fixing Faucet Leaks in Your Bathroom

Faucets tend to leak over time, leading to water wastage. So, how can you fix a leaking hot and cold faucet in a wash basin? Let's learn together.

How to Repair a Leaking Hot and Cold Faucet in a Wash Basin

1. If the leak occurs at the joint between the faucet and the pipes, it may be due to the loosening of the nut inside the joint. In this case, you should use tools to tighten the nut. It’s also possible that the U-shaped sealing gasket inside has aged or been damaged. In this situation, you need to replace the U-shaped sealing gasket with a new one.

2. If there is a leak at the seam under the faucet handle, this might be due to the triangular sealing gasket inside the faucet cap getting damaged or old. In this case, you’ll need to replace the triangular sealing gasket with a new one.

3. If the leak occurs at the faucet outlet, the internal spindle washer might be damaged or aged. In this case, you should replace the spindle washer with a new one.

How to Properly Clean and Maintain a Wash Basin

1. When cleaning the wash basin daily, use a sponge or a soft brush. Never use hot water directly to rinse it, nor should you soak the wash basin in hot water, as this can easily cause it to crack. If you need to use hot water in the wash basin, you should first add some cold water and then pour in the hot water. Adding hot water directly can also lead to cracking.

2. Over time, the drainage hose underneath the wash basin can accumulate a lot of dirt. To ensure smooth drainage, it’s recommended to regularly detach the drainage hose for cleaning and clearing. This not only prevents dirt accumulation but also helps avoid the growth of bacteria and unpleasant odors.

The above is a detailed guide on how to repair a leaking hot and cold faucet in a wash basin, as well as how to properly clean and maintain the wash basin. We hope this helps those in need. When dealing with a leaking hot and cold faucet, be sure to identify the specific cause and location of the leak before taking appropriate repair measures based on the actual situation.