Home / Blog Center / Chargers / Is Moving a Toilet 50 cm Likely to Cause Clogs? A Comprehensive Guide
Is Moving a Toilet 50 cm Likely to Cause Clogs? A Comprehensive Guide
10/01/2025 | Hawkrown
When installing a toilet, special attention is required, especially regarding the displacement aspect. Here, I will introduce whether moving a toilet 50 centimeters makes it prone to clogging.
Is it easy to clog when moving the toilet 50 centimeters？
Yes, it is likely to clog. When relocating a toilet, a displacement device is needed. However, the displacement device not only increases the length of the waste pipe but also adds more bends in the drainage, which can slow down drainage and make it more prone to clogs. Generally, changing the position of the toilet is not advisable, especially for siphon toilets. If it must be moved, it’s best to do so before tiling, as this can raise the floor slightly, increasing the drainage slope and alleviating clogs.
What should be noted when installing a toilet displacement device？
1、The installation distance of the toilet displacement device should not be too long; it is better to keep it within 30 centimeters. If the distance is short, the effect will be better. The maximum distance should not exceed 1 meter; otherwise, the risk of clogging will increase, along with unnecessary trouble.
2、If a long-distance displacement is necessary, it is advisable not to use siphon toilets, but rather straight-flush toilets, as they have greater flushing power and can reduce the risk of clogs.
3、During the displacement process, the drainage slope must be properly addressed. This means making the section near the waste outlet lower and designing the new waste outlet to be higher to facilitate future drainage and prevent clogging.
4、After moving the toilet, regular maintenance is essential. Avoid flushing larger debris down the toilet, as this can lead to clogs.
In summary：moving a toilet 50 centimeters can indeed lead to clogging. When changing the position of a toilet, a displacement device is required, which will increase the length of the waste pipe and the number of bends, resulting in slower drainage and a higher likelihood of clogs.
