A Beginner's Guide to Converting a Squat Toilet into a Western Toilet

In the past, many homeowners installed squat toilets in their homes, but since toilets are more convenient to use, many homeowners want to transform them. Here’s a look at the simplest method for converting a squat toilet to a toilet.

DIY Guide: How to Convert Your Squat Toilet to a Western Toilet：

1、Turn off the water source to the squat toilet and drain all the water from the pipes.

2、Disassemble the squat toilet and the P-trap, as toilets come with a built-in P-trap that doesn't need to be installed separately.

3、Reapply a waterproof layer, as the waterproofing may have been damaged during the removal of the squat toilet.

4、Measure the distance from the drainage outlet to the wall, and based on that measurement, purchase a suitable toilet.

5、Install an elbow joint at the original P-trap position, place the toilet in the corresponding position, and then install the fittings for the water tank.

6、Use silicone sealant to secure the toilet base, and after 24 hours, conduct a test to ensure the installation is satisfactory.

Key Points for Installing a Toilet：

1、Before installing the toilet, clean the installation site thoroughly, and level out any uneven surfaces to avoid wobbling later on. If the ground is slightly unlevel, make appropriate adjustments during the installation to achieve as much leveling as possible; otherwise, sealing may be affected, leading to odor issues later.

2、Determine the toilet installation position and mark it to ensure that the toilet outlet aligns with the drainage outlet. Additionally, if you are installing a wall-hung toilet, you will need to drill expansion screws; be careful during this process to avoid impacting the toilet installation.

3、Toilets come with various fittings, and different brands may have different parts and installation methods, so it’s essential to read the user manual carefully and follow the steps provided during installation.

In summary：the above methods for converting a squat toilet to a toilet and the key points for toilet installation are provided here. We hope this information is helpful to you. Since toilets are fixed installations, homeowners should measure the rough-in distance in advance before purchasing. If you would like to learn more related content, feel free to follow our website.