Easy Instructions for Installing a Faucet Heater

To facilitate the use of hot water in the kitchen, most households install a water tap heater. Let’s take a look at how to install a water tap heater.

How to Install a Water Tap Heater

1. Prepare the Heater

First, purchase a water tap heater. When buying, pay attention to the product model and quality. Make sure the model matches your tap and check that all internal components are included; otherwise, installation might not be possible.

2. Clean the Tap

Before installation, make sure to turn off the tap's valve and remove the tap. After removal, clean the pipe interface thoroughly to prevent debris from blocking the pipes. If there is rust on the pipe, perform rust removal first to ensure both aesthetics and prevent clogging.

3. Assemble the Heater

Next, assemble the heater. Open the packaging, and you will find a black rubber gasket. Place the gasket on the installation hole of the sink. Then, locate the base of the heater, which typically has a water inlet that needs careful observation to find. Attach the heater main unit to the water inlet while placing a rubber gasket between the base and the heater to ensure a tight fit. Moreover, connect the water outlet pipe to the top of the heater by gently turning it a few times.

4. Overall Assembly

After placing the rubber gasket on the sink installation hole, take the screws from the packaging and align the water tap heater with the sink installation hole. Use the screws to tighten them; the gasket will help secure the heater and prevent water from leaking underneath the sink. Then, connect the water inlet pipe, using a 4-point soft hose, ensuring both ends of the hose are tightened. The installation process is now complete.

5. Testing

Once the heater is installed, perform a test by plugging in the heater’s power cord and running water through it. If you notice fluctuations in water temperature during the test, address the issue promptly.

In summary, the above content covers how to install a water tap heater, and I believe everyone now understands! The installation method for a water tap heater is quite simple; feel free to refer to the steps outlined above.