Guide to Fixing a Faucet: How to Extract a Broken Interior Thread

Faucets are important tools in home decor; they may be small, but they are highly utilized. However, over time, faucets may experience issues like broken threads. So, how can you remove broken threads from a faucet? How should you choose a faucet? Let’s take a look!

How to Remove Broken Threads from a Faucet:

You can use the following methods to extract it.

1. Choose a suitable extractor based on the model and insert it into the broken faucet. Use a wrench to hold the extractor and turn it counterclockwise. Do not turn it clockwise, as that will make it tighter. After turning it about 4-5 times, you should be able to remove the broken threads from the faucet.

2. Use a hacksaw blade to cut the threads into several pieces, and then use a hammer to chisel from the outer side to remove them. However, be careful not to cut too deeply, to avoid damaging the internal wall of the pipe threads.

When installing a faucet, it is important to clear out any debris from the pipe to prevent damage to the valve core, blockage, and leaks. It's also necessary to wipe the surface of the faucet to remove any dirt. When using the faucet, be gentle and turn it smoothly without applying too much force.

How to Choose a Faucet:

1. Check the Water Flow:

First, when choosing a faucet, pay attention to the size of the water flow; a larger flow with abundant bubbles is better. Many people are not familiar with aerators, which actually consist of six layers made of metal and plastic. As the water passes through, the aerator grate cuts the water into many fine streams, allowing the water to coalesce.

2. Inspect the Appearance:

Next, when selecting a faucet, check its exterior. A good faucet should have a shiny, smooth surface. When buying, place the faucet in bright light to check for bubbles, oxidation, or other defects. Also, pay attention to the color of the faucet.

3. Test the Handle:

Finally, when choosing a faucet, consider the range of motion of the handle. Aim for one that has a larger range of motion. Current faucet handles can rotate 180 degrees or 360 degrees. The shapes can be spherical, curved, conical, etc. A good faucet handle should have low resistance, not slip, and ensure that the faucet and switch fit tightly together.

In summary, this is an introduction on how to remove broken threads from a faucet and how to choose a faucet. I hope this information is helpful to those in need. If you would like to learn more relevant knowledge in the future, feel free to follow Hawkrown.com.