Easy Solutions for a Faucet That Won't Budge

If the faucet cannot be turned, it needs to be addressed promptly to avoid affecting future use. Let's take a look at how to handle a faucet that won’t turn.

The faucet won't turn, how to handle it

1. If you cannot turn the faucet by hand, you will need to use a wrench or pliers to loosen the faucet's screws, which will allow you to turn it. If this doesn't work, you can gently tap it with a hammer to loosen it.

2. If the faucet still won't turn, it might be rusted, causing it to jam. You can use a rust remover to clean off the rust from the faucet. If there is a lot of rust, you may need to apply a larger amount of rust remover. Once the rust is removed, you should be able to turn the faucet.

3. If the faucet remains stuck, you may need to use a hacksaw to cut the pipe. Be careful to ensure an even cut and not to cut too deeply, then you can replace it with a new faucet.

4. While attempting to turn the faucet, you can also drip a few drops of lubricant oil into the threaded area to help it penetrate, which may allow you to unscrew the faucet.

5. Another method is to boil a kettle of water and pour it over the connection point of the faucet. The principle of thermal expansion may help to loosen the faucet so that it can be turned.

How to prevent faucet rust:

1. While using the faucet, maintain cleanliness by rinsing it with clean water to wash away dirt and limescale. For grease stains, use a cleaner. Additionally, you can apply wax to the surface of the faucet for protection.

2. Regularly clean the interior of the faucet by disassembling the aerator and valve core to prevent rust from forming.

In summary, this is how to handle a faucet that won't turn and how to prevent rust. Have you got it? There are many details to pay attention to when using a faucet. Try to handle these issues to prevent rusting.