Home / Blog Center / Chargers / What to Do If Your Toilet Brush Falls in the Toilet: Quick Tips

What to Do If Your Toilet Brush Falls in the Toilet: Quick Tips

08/01/2025 | Hawkrown

A toilet is a commonly used sanitary fixture in the home, and it is prone to being clogged by foreign objects during use. So, what should you do if a brush falls into the toilet and gets stuck? Let’s take a look.

What to Do If a Brush Falls Into the Toilet and Gets Stuck

1、First, determine the position of the brush inside the toilet. Normally, the toilet is U-shaped, which means the brush will get stuck in the drain. In this case, prepare a pair of tongs to grasp the brush and pull it out in one go.

2、If the brush is lodged deep inside, first fill the toilet bowl with water, then use a mop to push down hard into the toilet several times; this may help to push the brush into the drain.

3、Take a thin clothes hanger, straighten it into a wire, and insert it into the toilet to either hook the brush out or push it down the drain.

Installation Precautions for the Toilet

1、When installing the toilet, first determine the appropriate position and make sure the floor is level. During installation, avoid pouring materials into the toilet, especially within the toilet trap, as cement and mortar can cause clogs.

2、Pay attention to the height of the water seal at the bottom. If installed too low, it may cause unpleasant odors in the bathroom that can affect daily life. Conversely, if the water seal is too high, it can lead to water splashing around, so it’s important to adjust the height according to the actual situation.

3、Once the toilet is secured, promptly clean off any cement and debris from the toilet and floor. Then, connect the toilet tank and water pipes, ensuring that there are no leaks from the tank and that the drain pipe is clear.

4、The toilet tank is an important component. After installation, check for leaks carefully. After connecting the water pipe, conduct a water flow test to ensure that the pipe can supply water normally. Finally, after installing the angle valve and connecting the flexible hose, check the sealing efficacy of the inlet valve.

In summary:the above information addresses what to do if a brush falls into the toilet and gets stuck. I believe everyone understands now! Toilet clogs are a common issue, so it’s important to pay attention to maintenance during regular use. Additionally, do not dispose of stubborn stains in the toilet.

Contact Us

Submission Successful

ok