Home / Blog Center / Chargers / Quick Fixes for a Kitchen Faucet That Leaks When Rotating

Quick Fixes for a Kitchen Faucet That Leaks When Rotating

09/01/2025 | Hawkrown

Over time, the pivot area of kitchen faucets can develop leaks, which not only affects daily living and experience, but also leads to water waste. So, how can we repair a leaking kitchen faucet at the pivot point? Let’s take a look.

How to repair a leaking faucet swivel joint in the kitchen

1. If the faucet is leaking at the rotating outlet, it is recommended to replace the internal O-ring or triangular sealing ring of the faucet.

2. Use pliers to remove the faucet, and remember to wrap the screw area with sealing tape. If the leak occurs at the joint of the connecting pipe, you can tighten the nut or replace it with a new U-shaped sealing ring.

3. If the sealing tape is damaged, it can cause leaks. It is advisable to use pliers to remove the faucet and reapply new sealing tape.

Choosing a Kitchen Faucet: Important Considerations

1. Material

There are various materials for faucets, such as titanium alloy, chrome-plated stainless steel, and chrome-plated iron. High-quality faucets usually have a brass construction, making them more environmentally friendly.

2. Valve Core

The valve core acts as the heart of the faucet. High-quality faucets typically use ceramic valve cores, which are highly durable and can last over 300,000 uses. Lower quality materials often use brass or rubber seals which, while cheaper, have a shorter lifespan.

3. Plating

Standard faucets have a plating thickness of only 20 microns, which can easily oxidize over time due to air exposure. High-quality brass with chrome plating has a thickness of 28 microns, and the surface is evenly plated with a bright finish that remains shiny over time.

4. After-Sales Service

The after-sales service of the faucet is also very important. Brand faucets tend to have better guarantees for after-sales service, allowing for worry-free use of kitchen faucets.

5. Quality Identification

The main body of faucets is usually made of brass, with higher purity brass resulting in better plating quality and greater resistance to corrosion. Some manufacturers use zinc alloy to cut costs, but this material has poor corrosion resistance.

Conclusion: This article has provided an overview of how to repair leaks at the pivot point of kitchen faucets. We hope it is helpful to you. For more related information, please continue to follow the Hawkrown.com consultation platform.

Contact Us

Submission Successful

ok