Home / Blog Center / Chargers / How to Fix a Toilet Float That Causes Continuous Water Flow

How to Fix a Toilet Float That Causes Continuous Water Flow

07/01/2025 | Hawkrown

The toilet is a commonly used sanitary fixture in the bathroom, and over time it may encounter faults. So what should you do if the toilet float is malfunctioning and the water keeps running? How should you choose a toilet? Let's take a look!

What to do if the toilet float is malfunctioning and the water keeps running:

You can try the following troubleshooting steps.

1、First, try lifting the float; if the water stops running, it means the float position is not adjusted properly. In this case, you need to lower the float to increase its buoyancy, then turn off the water supply valve.

2、If lifting the float still causes the water to run, the inlet valve assembly may be broken. You should turn off the water supply to the toilet, empty the tank, detach the float and the water supply pipe, loosen the nut, and remove the entire float valve. You can then replace it with a new float valve.

A friendly reminder: when using the toilet, it's important to keep it clean regularly, and don't neglect the toilet brush. After flushing, it’s advisable to spray disinfectant and let it dry. Also, when flushing the toilet, close the toilet lid to prevent airborne particles from spreading, which could contaminate other sanitary fixtures in the bathroom.

How to choose a toilet:

1、Toilet glaze

First, when choosing a toilet, check the glaze. A good toilet glaze is smooth and even, with no bubbles or graininess. Additionally, it should have strong self-cleaning properties, remaining clean and not easily yellowing over time. A well-made toilet will also have glaze applied throughout, including the drainage system, making it less prone to contamination and ensuring smooth water flow.

2、Toilet hardware components

Next, pay attention to the quality of the toilet's components. Although the components are inside the tank, you can evaluate their quality through operation. A good toilet flushing button should feel solid and have good elasticity. If the button feels weak or flimsy, it indicates poor elasticity, and it’s not recommended for purchase.

3、One-piece vs. two-piece

Finally, consider the structure of the toilet. Toilets on the market are divided into one-piece and two-piece models. The main difference lies in the water tank; however, one-piece toilets have a lower production rate, which makes them more expensive. Choose according to your actual needs.

In summary:the above information provides an overview of what to do when a toilet float malfunctions and how to choose a toilet. I hope this helps those in need. If you want to learn more related knowledge in the future, feel free to follow the news on Hawkrown.

Contact Us

Submission Successful

ok