How to Fix a Toilet That Won't Stop Running and Making Noise

There are many detailed aspects to pay attention to when using a toilet, and proper maintenance is essential to avoid affecting its use. What should you do if the toilet keeps running and making noise after flushing? Let's take a look.

What to do if the toilet keeps running and making noise after flushing：

1、Turn off the main water valve, then remove the lid from the toilet tank.

2、Locate the float in the tank and check its functioning. If water keeps flowing in even when the tank is full, it indicates a leak.

3、Gently pull on the float; if it’s difficult to move or doesn’t move smoothly, the float is damaged and needs to be removed and replaced with a new one.

4、If the float is blocked, remove it, clean it thoroughly, and then reinstall it.

What to do if the toilet won’t fill with water after flushing：

1、If the toilet is not filling with water, first check if the angle valve has been accidentally turned off. Simply open it to resolve the issue. To avoid this situation, try not to use a straight valve type, as it can be easily turned off with a slight touch.

2、Remove the lid from the tank and check the float inside to see if it’s stuck due to debris or some obstruction. If the float is stuck, remove the obstruction to restore normal water filling. If the float is damaged, it will need to be replaced.

3、Additionally, if the toilet is not filling with water, the filter may be clogged with dirt, affecting normal operation. In this case, remove the filter, clean off any dirt, and reinstall it.

Conclusion：This concludes the discussion on what to do if the toilet keeps running after flushing and how to deal with a toilet that won’t fill with water. Have you understood it all? If the toilet encounters any issues, it’s important to address them promptly to ensure proper functioning and avoid unnecessary troubles.