Removing the Toilet Hose: Expert Tips and Tricks

Toilet is a commonly used device in daily life, but it may encounter some issues during use that need to be addressed. So, what are the techniques for dismantling the hose at the back of the toilet? What should be noted during toilet installation? Let's take a look！

一、Techniques for dismantling the hose at the back of the toilet

1、First, prepare the necessary tools, such as a screwdriver.

2、Then, turn off the water valve below the tank and drain the water inside.

3、Finally, unscrew the hose at the water inlet and remove the black rubber pad at the bottom of the tank, so you can unscrew other hoses and fittings.

When dismantling the toilet hose, make sure to turn it counterclockwise with pliers, and before installation, turn off the main water supply at home. If the inlet hose is very stiff and cannot align with the connection easily, it is best to bend it into roughly the right shape before installation to save effort.

二、Things to pay attention to when installing a toilet

1、Firstly, when installing the toilet, ensure that the material of the sewage pipe complies with standards, the inner wall of the pipe should be smooth and flat, and a trap should be set to prevent odors, but a water bend should not be installed as it may affect flushing.

2、When applying mortar to the bottom of the toilet, pay attention to the mix ratio of cement and sand, which should be 1:3. Also, ensure the ground is level. After installation, connect the water source to check the tightness of the water inlet. Additionally, verify that the drainage and installation positions correspond and check for any leaks.

3、Before installing the toilet, accurately measure all aspects such as the pit distance, size of the outlet pipe, etc., to avoid issues with mismatched dimensions during installation, which can cause unnecessary troubles.

4、Also, ensure that the drainage pipe is unobstructed before installation, and no blockages are present within the pipe. The area around the outlet should be kept smooth.

5、Finally, when securing the toilet, be sure to use silicone sealant and apply it thoroughly without missing spots. After application, do not move the toilet easily; wait for 24 hours for the sealant to dry before using it normally.

In summary：the above content introduces the techniques for dismantling the hose at the back of the toilet and the considerations for toilet installation. I hope this information will be helpful to those in need. If you want to learn more related knowledge in the future, feel free to follow Hawkrown News.