Home / Blog Center / Chargers / Step-by-Step Guide to Relocating Your Toilet
Step-by-Step Guide to Relocating Your Toilet
03/01/2025 | Hawkrown
If the toilet needs to be relocated, there are many details to pay attention to. Let's take a look at the process of relocating a toilet.
一、Toilet Relocation Process
1、Start by creating a groove on the floor, ensuring the depth meets the requirements to avoid affecting the floor height after installation.
2、Once the groove is made, apply a waterproof coating to prevent water leakage from the flooring.
3、Connect one end of the relocation device, fitted with a rubber ring, to the toilet’s drainage outlet, and the other end to the new location designated for the toilet.
4、Secure the relocation device, then use cement mortar to fill and seal the gaps between the device and the groove.
5、After handling the above steps, level the floor and complete the waterproofing work, and it will be ready.
二、Details to Note When Relocating a Toilet
1、The distance for toilet relocation should be controlled carefully, preferably within 30 cm. If a longer distance is necessary, it should not exceed 1 meter to avoid increasing the chances of toilet blockage.
2、If the distance for relocation is relatively long, avoid using siphonic toilets as this may affect normal usage later. In such cases, a direct flush toilet is generally recommended due to its greater flushing power, which reduces the likelihood of pipeline blockage.
3、When installing the relocation device, it is important to maintain a suitable drainage slope; the old toilet’s drainage outlet should be lower than that of the new toilet to facilitate better drainage afterward.
4、After relocating the toilet, it's essential to carry out maintenance, avoiding the disposal of various substances into the toilet to prevent blockage. Regularly flush the pipes to extend the life of the installation.
In summary：this is an overview of the toilet relocation process and important details to consider. It’s crucial to pay close attention to these steps to avoid mistakes that could affect normal usage, leading to unnecessary troubles in the home.
