Is Your Faucet Out of Cold Water? Reasons and Fixes

The double outlet faucet has brought convenience to our lives. However, during use, various problems may arise. For example, what could be the reason if the faucet only provides hot water and no cold water?

The faucet only produces hot water and does not provide cold water.

1. One reason could be a malfunction of the faucet itself. For instance, if the water quality is poor, the filter mesh inside the faucet might be clogged with sand, resulting in low pressure on the cold water side. As a result, only hot water will flow when turned on.

2. Another possibility is that the installation of the faucet was done incorrectly, with the hot and cold water pipes connected in the wrong directions. This would cause the faucet to only dispense hot water. It is essential to pay special attention when connecting the faucet: the left side should be connected to hot water, while the right side should be connected to cold water. After connecting, open the water source to check if it functions properly.

3. Additionally, the issue may arise from a water supply interruption in the household. In this case, the hot water present is just the stored water from the water heater. It is advisable to contact the water supply company to inquire when the water will be available again.

Important considerations when using a faucet:

1. During installation, make sure to clear any debris from the pipes to prevent damage, blockage, or obstruction of the valve core. It is also important to clean the surface promptly and not leave any residue from construction materials.

2. When operating the faucet, be cautious not to use excessive force on the switches; a gentle twist or movement is sufficient. Even for traditional faucets, there is no need to apply great effort to turn them off completely. Never use the handle as a support. If the faucet is equipped with a mesh filter, it is suggested to remove and rinse it after a period of use to clear any debris. For products with hoses, ensure that the hoses remain naturally extended to avoid any breakage.

3. For bathtub faucets with a handheld showerhead, keep the metal hose in an extended state, avoiding wrapping it around the faucet. Additionally, ensure that the joint between the hose and the valve body does not create dead angles to prevent damage or breakage of the hose.

In conclusion, this article has provided information about the issue of faucets only dispensing hot water and not cold water. I hope it will be helpful for everyone. For more related knowledge, please continue to follow the Hawkrown.com, where we will present more exciting content in the future.