Home / Blog Center / Chargers / No Washing Machine Faucet in Your Bathroom? Here’s How to Adapt

No Washing Machine Faucet in Your Bathroom? Here’s How to Adapt

06/01/2025 | Hawkrown

Nowadays,many households choose wall-mounted faucets for their renovations。This type of faucet is not only aesthetically pleasing but also exquisite。Here’s how to install a wall-mounted faucet。

Installation Process:

1、Turn on the water source and flush out any impurities in the pipe,then turn off the water source again。

2、If there are impurities in the water pipe that prevent water supply,rework is necessary。

3、Lock the flange cover into the water inlet elbow teeth,then wrap the teeth with a sealing tape and lock it into the wall outlet pipe。Adjust the rotation angle of the hot and cold water inlet elbows so that the hole spacing matches the hot and cold water inlet holes of the main body。

4、Rotate the flange cover close to the wall for better stability。

5、Insert the rubber gasket into the hot and cold water inlet connection nut,tighten the elbow of the hot and cold water inlet,and use a 30 mm wrench to secure it while conducting a waterproof test。

Maintenance of Wall-Mounted Faucets:

1、It is advisable to have experienced and qualified professionals carry out the installation。During installation,the faucet should not be struck by hard objects,nor should it be contaminated with cement or glue,as these could damage the gloss of the surface coating。Also,ensure that the internal pipes are free from debris before installing the faucet。If you have difficulties with this,it is better to contact professionals for assistance。

2、If the water pressure is not below 0.2 MPa (equivalent to 2kgf/cm2),and after some time you notice a reduction in water flow or the water heater shuts off completely,gently unscrew the filter cover at the water outlet of the faucet to clean out any debris,which should restore normal flow。

3、Do not apply excessive force when opening or closing the faucet;a gentle turn is sufficient。Even for traditional faucets,avoid using excessive force to tighten。Particularly,do not use the handle as a support,as this can directly affect the longevity of the faucet。

Conclusion: This is the information I wanted to share about how to install and maintain wall-mounted faucets。For those looking to learn more,please continue to follow our website,as we will provide more exciting content soon。

Contact Us

Submission Successful

ok