Home / Blog Center / Chargers / How to Easily Replace Your Toilet Damper

How to Easily Replace Your Toilet Damper

03/01/2025 | Hawkrown

When it comes to toilet dampers, many people may not be very familiar with them, let alone know how to replace them. But don’t worry, I will provide a brief introduction to this topic.

一、How to Replace a Toilet Damper

1、First, we need to remove the original toilet damper. Then you will see the two ends of the toilet damping system. At this point, press the pin inward to remove the toilet lid. It's important to use tools for this step, as using your hands can easily cause injury.

2、Measure and observe the removed pin to check its size and style, and then purchase the same type of pin.

3、Finally, install the new damper. Follow the same method used for disassembly to reattach it. Install the newly purchased pins back into the toilet lid, aligning the two holes with the toilet column, and press to secure it.

二、Are Toilet Dampers Disposable

Dampers can be used for a long time; their primary function is to cushion the toilet lid when it falls and to reduce the impact force when the lid contacts the toilet, preventing loud noises. If the damper is damaged, it can be directly replaced. First, remove the original damper in the toilet. The damping system is usually located at the connection between the toilet lid and the toilet. You can use tools to detach the pins on both sides of the toilet. Then, based on the size and style of the old pins, purchase two identical pins. Finally, reinstall the newly purchased pins and the toilet lid following the same disassembly steps.

三、What is the Function of a Toilet Damper

Repeated opening and closing of the toilet lid can seriously damage the toilet and its lid, significantly affecting their lifespan. Therefore, we should gently lower them. To change this situation, the rotation damper is essential. Its special cushioning and damping features transform the lid's descent into a slow mechanical motion process. This allows for a gradual and rhythmic descent, which prevents the impact of gravity caused by inertia, thus eliminating noise interference and prolonging the lifespan of the toilet lid.

In summary:after reading the above introduction, I believe you now have a better understanding of how to replace a toilet damper. If you want to know more related information, please continue to follow our website, as we will present more exciting content in the future.

Contact Us

Submission Successful

ok