Choosing Between Plastic Steel Putty and Glass Glue for Toilet Sealing

In the edging process of a toilet, the materials used must be appropriate to achieve the desired effect. Below, I will introduce whether to use plastic steel putty or silicone for toilet edging.

一、Whether to use plastic steel putty or silicone for toilet edging

Using plastic steel putty for toilet edging is a very good choice. It possesses all the advantages of silicone, and this material also has strong anti-oxidation capabilities; it will not turn black even after long-term use. Filling gaps with plastic steel putty can provide greater stability. It’s important to ensure that the surface is clean before using plastic steel putty, as any dirt can affect the bonding effect.

二、Things to pay attention to during toilet installation

1、Before installing the toilet, check whether the floor is level. If it is not, adjustments need to be made. Additionally, any excess length of the toilet's drainage pipe should be cut down to an appropriate length.

2、Next, mark the positions for the toilet’s sewage pipe and drainage pipe. It’s crucial to determine the installation positions before using an electric drill to make holes for the expansion screws. At this point, install the sealing ring and apply some cement slurry around the sewage pipe to ensure there are no leaks.

3、During the installation of the toilet, silicone should be applied to the bottom surface, ensuring there are proper distances between the toilet and the wall while making sure the toilet is aligned. After the toilet is installed, check its flushing function and ensure that everything runs smoothly.

4、After the toilet installation, inspect the water pipes. Let the water run for a few minutes before connecting the water supply pipe, and check for leaks in the water piping. Once the toilet tank is full, press the flush button to check the drainage. If the water doesn’t drain quickly, check for any clogs in the pipes.

In summary：the content regarding whether to use plastic steel putty or silicone for toilet edging has been introduced. Using plastic steel putty for toilet edging is indeed a good option, as it includes all the advantages of silicone. Just remember to clean the surfaces beforehand to avoid affecting the bonding effect.