How to Properly Wire and Install a Bathroom Heater Light

Many people install a heated bath lamp in the bathroom. So, how do you wire the bath lamp? What is the installation method? Here, I will briefly introduce the process.

Wiring Method for the Bath Lamp

First, connect the ground wire to the outer casing of the bath lamp, connect the neutral wire to the wiring terminal that connects to the lamp holder, and connect the live wire to the terminal that connects to the switch. Then connect the corresponding wires for lighting, heating, etc., to the respective terminals on the switch.

Installation Steps for the Bath Lamp

1. Remove the cover and bulb

Normally, a new bath lamp comes assembled. When installing, we should first remove the cover and bulb. Unscrew the bulb, and you will see that the panel is fixed to the main unit of the bath lamp by spring hooks. Remove the spring hooks to detach the cover.

2. Wiring for the Bath Lamp

Pull down the reserved wires from the installation position of the ceiling bath lamp and connect them to the corresponding terminals on the bath lamp. When wiring, be careful not to strip too much of the wire insulation. If the copper core of the wire is exposed, make sure to wrap it with insulating tape.

3. Install the exhaust pipe and secure the main unit

Attach the clips to the main unit of the bath lamp, then tilt the unit and place it into the ceiling. Connect the other end of the reserved exhaust pipe to the exhaust port of the bath lamp and seal it tightly with aluminum foil tape. Finally, secure the main unit to the ceiling.

4. Install the bulb and cover

Align the cover with the main unit and secure it using the spring hooks. Finally, screw the heating bulb tightly into the bath lamp.

5. Install the switch

Pull out the reserved wires for the switch, and connect them to the appropriate terminals on the switch. If there are excess wires, wrap them with insulating tape. Once the wiring is complete, use screws to fix the switch to the junction box, then attach the switch panel.

In summary：this is a simple introduction to the wiring and installation method of the bath lamp. I hope this article can provide you with reference and assistance when installing the bath lamp in the future. For more related information, please continue to follow our website.