How to Repair and Install Your Toilet's Water Supply

In homes, toilets are commonly used fixtures that can easily encounter problems. Once a malfunction occurs, it affects usability. Let's take a look at how to repair and install the water supply and drainage of a toilet.

一、How to Repair and Install Toilet Water Supply Issues

Repairing the Toilet Water Supply: Start by checking the water inlet valve and the flushing button to identify the cause of the malfunction. If the issue is with the water inlet valve, disassemble it to check for blockages in the filter screen; if it's clogged, simply clean it out. If the valve itself is faulty, replace it with a new one. If the flushing button is jammed, preventing the float ball from returning to its position, you can open the tank, adjust the float ball's position, and disassemble the flushing button for inspection or replacement. Reassemble everything to resolve the water supply issue.

Repairing the Toilet Drainage: Issues with toilet drainage are often related to the piping, including loose connections at the drainage outlet or blockages in the pipe. If the problem arises from a loose connection between the toilet and the drainage pipe, you will need to disassemble the toilet and realign the connection for proper installation. For blocked drainage pipes, use a plunger or drain cleaning agents to clear the blockage.

二、Important Considerations for Toilet Installation

1、Check the Drainage Pipe: Before installing the toilet, inspect the drainage pipe for any debris, such as dirt or waste paper. All obstructions should be cleared out completely to avoid potential clogging during future use.

2、Ensure the Floor is Clean: The installation area for the toilet must be level. If the floor is uneven, it may be impossible to secure the toilet properly during installation. Therefore, clean the installation site and level any uneven areas before proceeding.

3、Check Toilet Quality: Before installation, it’s advisable to inspect the quality of the toilet itself, especially the glaze on the siphon trap. If the surface is rough, it may easily accumulate waste and scale, leading to clogging problems down the line.

In summary：now that you understand how to repair and install the water supply and drainage of a toilet, if you want to know more related knowledge, feel free to follow us at Hawkrown.com!